Monday, March 18, 2013

PMC disrupts 100G economics with industry’s first OTN processor

USA: PMC has introduced the PM5440 DIGI 120G, the industry‟s only single-chip OTN processor supporting 10G, 40G and 100G speeds for OTN transport, aggregation and switched deployments.

DIGI 120G allows for the efficient sharing and dynamic assignment of network resources, enabling OTN networks to effectively virtualize optical network bandwidth to meet the elastic traffic demands of Big Data. This unprecedented level of silicon integration facilitates the most cost effective designs, engineering efficiency, and lowest power approach to OTN system solutions.

Optical transport networks play a critical role in providing the interconnect infrastructure required to efficiently and reliably deliver cloud-based services. Continued growth in mobile data traffic and the projected 3X growth in datacenter driven WAN traffic are the catalysts behind industry‟s need for 100G connectivity to aggregate the increasing deployment of 10G ports from the metro edge.

To unlock the full value of 100G networks, service providers are architecting their transport infrastructure to enable dynamic bandwidth allocation with granularity from 100Gbps down to 1Gbps, without interruption to network traffic, in order to „virtualize‟ the optical network bandwidth.

OTN allows for flexible aggregation and switching from 1G to 100G
With today‟s networks dominated by 1G and 10G services, traditional point-to-point OTN transponders do not efficiently map these service rates to 100G due to a lack of OTN multiplexing granularity to 1Gbps.

PMC‟s new DIGI 120G supports OTN Transport, OTN aggregation and OTN switching. Multiservice OTN muxponders and OTN switching cards using DIGI 120G will enable efficient aggregation and grooming of lower speed services into 100G.

As the industry‟s first OTN processor to support on-demand re-sizing of ODUflex from 1G to 100G, as well as 10G, 40G and 100G speeds, DIGI 120G allows OEMs to deliver a full suite of multiservice OTN switched cards for Packet Optical Transport Platforms (P-OTP) and muxponders for ROADMs. Numerous configurations are supported, including 12 ports at 10Gbps, 3 ports at 40Gbps or 1 port at 100Gbps.

DIGI 120G‟s unique single-chip architecture allows OEMs to leverage a common hardware and software investment to rapidly build-out a portfolio of line cards, translating into the lowest bill of material, lowest power, and fastest time-to-market.

“Explosive packet traffic growth projected from cloud services, residential broadband, and mobile backhaul is driving China Mobile to invest in scaling up our optical transport network to support 100G,” said Bill Huang, GM of China Mobile Research Institute.

“To maximize our 100G investment, we need OTN solutions from the 100G ecosystem that allow us to manage the optical bandwidth efficiently so we can economically deploy 100G and OTN switching on a wide scale.”

DIGI 120G delivers industry-leading innovations
Reducing line card power and bill-of-material by more than fifty percent, DIGI 120G stands uniquely differentiated as:

* Industry‟s only single-chip solution delivering 12x10G, 3x40G or 1x100G port densities.
* Industry‟s highest number of 10G ports enabling 2x higher density 10G OTN line cards.
* Industry‟s highest gain 40G/100G enhanced-FEC extending optical reach by 2x vs GFEC.
* Industry‟s only 120G OTN solution with OIF‟s OTN-over-Packet Fabric Protocol (OFP).
* First OTN processor to enable hitless packet traffic scaling with ITU-T‟s G.hao/G.7044.
* Flexible per port client-mapping of OTN, Ethernet, Storage, IP/MPLS and SONET/SDH.
* Synchronous Ethernet (SyncE), 1588v2 Precision Time Protocol (PTP), and Ethernet Link OAM (802.3ah) delivering per port Carrier Ethernet performance.

“The optical transport network infrastructure needed to support Big Data requires efficient sharing and dynamic allocation of the optical network bandwidth,” said Babak Samimi, vice president of marketing and applications for PMC's Communications Business Unit.

“Our DIGI 120G brings innovations that disrupt the economics of 100G by responding to the industry‟s need to move towards dynamically configurable optical transport networks for delivering cloud services.”

The PM5440 DIGI 120G along with the lower port density PM5441 DIGI 60G are available now.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.