CHANDLER, USA: Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, announced the Digital Interleaved Power Factor Correction (PFC) Reference Design, which demonstrates how to realize the benefits of fully digital PFC for green power-supply designs.
Specifically, this free reference design provides an easy method to evaluate the power efficiency and features of Microchip’s dsPIC33 “GS” series of Digital Signal Controllers (DSCs) for Switch Mode Power Supplies (SMPSs), in an interleaved PFC application.
The trend toward digital power conversion is enabling green power-supply designs, along with smarter and more efficient power systems. This trend helps to lower the carbon footprint of power systems and ease the burden on the world’s strained power grids. High-performance power supplies are used in a wide variety of applications, including telecom and industrial equipment, digital TVs, lighting, air conditioners and other home appliances.
Digital interleaved PFC improves the power supply’s overall efficiency, along with the input power factor, voltage regulation and the Total Harmonic Distortion (THD) of the input current.
“This reference design enables our customers to quickly bring the benefits of digital interleaved PFC to their products, and create a more efficient and greener power distribution grid,” said Sumit Mitra, vice president of Microchip’s High Performance Microcontroller Division. “It uses the flexible dsPIC33F 'GS' series of DSCs, which enables easy customization and configuration via simple modifications to the control software.”
Showing posts with label Microchip. Show all posts
Showing posts with label Microchip. Show all posts
Wednesday, September 9, 2009
Tuesday, August 25, 2009
Microchip starter kit helps develop low-power USB designs with touch and motion sensing
CHANDLER, USA: Microchip Technology Inc. has announced the MPLAB Starter Kit for PIC18 Microcontrollers (part # DM180021), which contains all of the components, documentation, schematics, debugging and programming capabilities needed to evaluate the high-performance PIC18 8-bit MCU family in low-power USB and touch-sensing applications.
The kit includes a development board featuring a 44-pin PIC18F46J50 MCU with nanoWatt XLP technology for extreme low power, mTouch capacitive touch sensing, Bosch Sensortec BMA150 accelerometer, 64 KB Flash program memory, and much more. This complete evaluation kit is available at Microchip's web site, allowing engineers to evaluate the performance and peripherals of the entire PIC18 family for less than $60.
Hardware debugging and programming come integrated with the MPLAB Starter Kit for PIC18 Microcontrollers, meaning an additional debugger or programmer is not required. The kit is completely USB-powered, so a separate power supply does not need to be purchased.
Pre-programmed touch-sensing code, as well as Microchip’s free USB application stack and bootloader, eliminate the need for engineers to develop their own code. Additionally, the board includes demo application software that enables it to read from the memory card (MSD), or function as a USB mouse or joystick (HID), or simple COM port (CDC) using the free Microchip stacks.
By simply scrolling through code options using capacitive-touch buttons, engineers can demonstrate the PIC18 MCUs with a MicroSD memory card, potentiometer, acceleration sensor, and OLED display—functions that are essential for a wide range of low-power applications.
The MPLAB Starter Kit for PIC18 Microcontrollers includes the Bosch Sensortec BMA150 digital triaxial accelerometer, which enables the PIC18 Starter Kit board to detect acceleration in 3 perpendicular axes for sensing the board’s tilt and motion.
The board ships with demo code that enables it to function as a USB mouse or joystick using the accelerometer. Acceleration on all three axes is used to compute the board tilt, which is then converted to movement of the mouse cursor on the X and Y axes. The accelerometer allows the cursor to move slowly when the board is tilted a small amount, and quickly when there is a steeper tilt.
“Our BMA150’s small footprint and very low current consumption provides an ideal complement to the PIC18 XLP MCU,” according to Jim Baka, Bosch Sensortec Sales Manager for North America.
“We are excited about the opportunity to offer our customers a complete system optimized for low power, while leveraging the rich development software suite of Microchip’s PIC18 Starter Kit. Building upon the trend of expanded user interface and extended battery life, engineers now have a powerful tool combining touch and motion in a single platform.”
“An increasing number of portable embedded applications require low power, touch sensing and USB communication,” said Derek Carlson, vice president of Microchip’s Development Tools Group. “The MPLAB Starter Kit for PIC18 Microcontrollers is a complete development system with breakthrough affordability, integrated features and remarkable ease of use.”
The MPLAB Starter Kit for PIC18 Microcontrollers (part # DM180021) is priced at $59.98 and can be purchased today.
The kit includes a development board featuring a 44-pin PIC18F46J50 MCU with nanoWatt XLP technology for extreme low power, mTouch capacitive touch sensing, Bosch Sensortec BMA150 accelerometer, 64 KB Flash program memory, and much more. This complete evaluation kit is available at Microchip's web site, allowing engineers to evaluate the performance and peripherals of the entire PIC18 family for less than $60.
Hardware debugging and programming come integrated with the MPLAB Starter Kit for PIC18 Microcontrollers, meaning an additional debugger or programmer is not required. The kit is completely USB-powered, so a separate power supply does not need to be purchased.
Pre-programmed touch-sensing code, as well as Microchip’s free USB application stack and bootloader, eliminate the need for engineers to develop their own code. Additionally, the board includes demo application software that enables it to read from the memory card (MSD), or function as a USB mouse or joystick (HID), or simple COM port (CDC) using the free Microchip stacks.
By simply scrolling through code options using capacitive-touch buttons, engineers can demonstrate the PIC18 MCUs with a MicroSD memory card, potentiometer, acceleration sensor, and OLED display—functions that are essential for a wide range of low-power applications.
The MPLAB Starter Kit for PIC18 Microcontrollers includes the Bosch Sensortec BMA150 digital triaxial accelerometer, which enables the PIC18 Starter Kit board to detect acceleration in 3 perpendicular axes for sensing the board’s tilt and motion.
The board ships with demo code that enables it to function as a USB mouse or joystick using the accelerometer. Acceleration on all three axes is used to compute the board tilt, which is then converted to movement of the mouse cursor on the X and Y axes. The accelerometer allows the cursor to move slowly when the board is tilted a small amount, and quickly when there is a steeper tilt.
“Our BMA150’s small footprint and very low current consumption provides an ideal complement to the PIC18 XLP MCU,” according to Jim Baka, Bosch Sensortec Sales Manager for North America.
“We are excited about the opportunity to offer our customers a complete system optimized for low power, while leveraging the rich development software suite of Microchip’s PIC18 Starter Kit. Building upon the trend of expanded user interface and extended battery life, engineers now have a powerful tool combining touch and motion in a single platform.”
“An increasing number of portable embedded applications require low power, touch sensing and USB communication,” said Derek Carlson, vice president of Microchip’s Development Tools Group. “The MPLAB Starter Kit for PIC18 Microcontrollers is a complete development system with breakthrough affordability, integrated features and remarkable ease of use.”
The MPLAB Starter Kit for PIC18 Microcontrollers (part # DM180021) is priced at $59.98 and can be purchased today.
Monday, August 3, 2009
Microchip's 100Mbps Ethernet controllers with integrated security engines
CHANDLER, USA: Microchip Technology Inc. today announced the low-cost ENC624J600 standalone, IEEE 802.3 compliant, 100Mbps Ethernet interface controllers.
These Ethernet controllers combine a 10/100Base-TX physical interface (PHY) and a Media Access Controller (MAC) with a hardware cryptographic security engine, and can connect to any PIC microcontroller via an industry-standard Serial Peripheral Interface (SPI) or a flexible parallel interface.
Additionally, each device has a unique, factory-preprogrammed MAC address and 24 Kbytes of configurable SRAM for packet transmit/receive buffering and data storage.
This combination of speed, flexibility and features enables designers to create fast, secure network- and Internet-connected embedded applications with minimized board space, cost and complexity.
Demand is on the rise for embedded applications with higher-speed data connectivity, and Ethernet is the leading networking technology. By adding Ethernet connectivity to an embedded system, microcontrollers can be used to distribute data over a network and can be controlled remotely.
Ethernet’s infrastructure, performance, interoperability, scalability and ease of development have made it an ideal choice for embedded communications.
“The ENC624J600 Ethernet controllers are well equipped for a wide range of embedded applications that require fast and secure data communications,” said Mitch Obolsky, vice president of Microchip’s Advanced Microcontroller Architecture Division. “With the introduction of these Ethernet controllers, a whole new class of microcontroller-based applications can be cost-effectively connected to local and global networks.”
Many embedded applications require added security to ensure that only the intended users can gain access to monitor and control a remote network application.
The ENC624J600 controllers integrate hardware cryptographic security engines that perform RSA, Diffie-Hellman, MD5 and SHA-1 algorithm computations in support of cryptographic protocols such as SSL/TLS, SSH and various VPNs.
These integrated hardware features enable secure data transmissions with reduced code size, faster connection establishment and throughput, and reduced firmware development efforts.
Each ENC624J600 controller has a unique, factory preprogrammed Ethernet MAC address, which is required for every Ethernet device. This simplifies the design and manufacturing process by eliminating the cost of buying an Organizationally Unique Identifier (OUI) from the IEEE, and the time required to perform serialized MAC address programming during manufacturing.
The configurable, 24 Kbyte SRAM buffer memory provides a flexible, reliable data-management system that enables an efficient method for packet storage, retrieval and modification that reduces memory requirements for the host microcontroller.
The support of both serial SPI and flexible parallel interfaces to any host microcontroller provides maximum flexibility for end designers to balance the end-system performance vs. cost.
With an SPI interface, only four pins are required to connect to the microcontroller, enabling the use of smaller MCU packages for space-constrained applications.
Microchip offers a TCP/IP stack that can be used for free with any of its 8-, 16- or 32-bit PIC microcontrollers or dsPIC® digital signal controllers. The stack includes Secure Sockets Layer (SSL) encryption and a TCP/IP Configuration Wizard to simplify the configuration of Ethernet projects.
Additionally, the stack utilizes the industry-standard SSLv3 protocol to secure any TCP connection, while building in support for the HTTP Web server and SMTP e-mail client modules.
Example applications that can take advantage of the ENC624J600 Ethernet controller include: entertainment (Internet radios); telecommunications (VoIP phone adapters); inventory management (vending machines, hotel mini bars); remote diagnostics/alerts (appliances, factory machines, POS terminals, power supplies, servers/networks); security (asset monitoring, fire and safety, security panels, access control, fingerprint recognition); remote sensing/actuators (industrial control/automation, lighting control, environmental control).
These Ethernet controllers combine a 10/100Base-TX physical interface (PHY) and a Media Access Controller (MAC) with a hardware cryptographic security engine, and can connect to any PIC microcontroller via an industry-standard Serial Peripheral Interface (SPI) or a flexible parallel interface.
Additionally, each device has a unique, factory-preprogrammed MAC address and 24 Kbytes of configurable SRAM for packet transmit/receive buffering and data storage.
This combination of speed, flexibility and features enables designers to create fast, secure network- and Internet-connected embedded applications with minimized board space, cost and complexity.
Demand is on the rise for embedded applications with higher-speed data connectivity, and Ethernet is the leading networking technology. By adding Ethernet connectivity to an embedded system, microcontrollers can be used to distribute data over a network and can be controlled remotely.
Ethernet’s infrastructure, performance, interoperability, scalability and ease of development have made it an ideal choice for embedded communications.
“The ENC624J600 Ethernet controllers are well equipped for a wide range of embedded applications that require fast and secure data communications,” said Mitch Obolsky, vice president of Microchip’s Advanced Microcontroller Architecture Division. “With the introduction of these Ethernet controllers, a whole new class of microcontroller-based applications can be cost-effectively connected to local and global networks.”
Many embedded applications require added security to ensure that only the intended users can gain access to monitor and control a remote network application.
The ENC624J600 controllers integrate hardware cryptographic security engines that perform RSA, Diffie-Hellman, MD5 and SHA-1 algorithm computations in support of cryptographic protocols such as SSL/TLS, SSH and various VPNs.
These integrated hardware features enable secure data transmissions with reduced code size, faster connection establishment and throughput, and reduced firmware development efforts.
Each ENC624J600 controller has a unique, factory preprogrammed Ethernet MAC address, which is required for every Ethernet device. This simplifies the design and manufacturing process by eliminating the cost of buying an Organizationally Unique Identifier (OUI) from the IEEE, and the time required to perform serialized MAC address programming during manufacturing.
The configurable, 24 Kbyte SRAM buffer memory provides a flexible, reliable data-management system that enables an efficient method for packet storage, retrieval and modification that reduces memory requirements for the host microcontroller.
The support of both serial SPI and flexible parallel interfaces to any host microcontroller provides maximum flexibility for end designers to balance the end-system performance vs. cost.
With an SPI interface, only four pins are required to connect to the microcontroller, enabling the use of smaller MCU packages for space-constrained applications.
Microchip offers a TCP/IP stack that can be used for free with any of its 8-, 16- or 32-bit PIC microcontrollers or dsPIC® digital signal controllers. The stack includes Secure Sockets Layer (SSL) encryption and a TCP/IP Configuration Wizard to simplify the configuration of Ethernet projects.
Additionally, the stack utilizes the industry-standard SSLv3 protocol to secure any TCP connection, while building in support for the HTTP Web server and SMTP e-mail client modules.
Example applications that can take advantage of the ENC624J600 Ethernet controller include: entertainment (Internet radios); telecommunications (VoIP phone adapters); inventory management (vending machines, hotel mini bars); remote diagnostics/alerts (appliances, factory machines, POS terminals, power supplies, servers/networks); security (asset monitoring, fire and safety, security panels, access control, fingerprint recognition); remote sensing/actuators (industrial control/automation, lighting control, environmental control).
Tuesday, July 28, 2009
Microchip's analog resistive touch-screen controllers for embedded markets
CHANDLER, USA: Microchip Technology Inc., a leading provider of MCU and analog semiconductors, today announced the mTouch AR1000 Resistive Touch-Screen Controllers—the embedded industry’s most innovative analog resistive touch-screen controllers.
Adding to Microchip’s comprehensive portfolio of mTouch capacitive and inductive touch-sensing solutions, the AR1000 controllers further solidify Microchip’s position of having the broadest touch-controller product offering in the semiconductor industry.
By providing built-in decoding and advanced filtering, as well as controller-driven calibration, the controllers lower costs and reduce time to market for any embedded resistive-touch design.
Prior to the AR1000 controller, embedded systems implementing resistive-touch user interfaces were limited to basic Analog-to-Digital Converters (ADCs) that required extensive development and integration.
The AR1000 controllers eliminate this type of trial-and-error engineering by providing sophisticated, proprietary touch-screen decoding algorithms that enable applications to receive fully processed, reliable touch coordinates.
Combining Microchip’s capabilities in microcontroller manufacturing with the recently acquired Hampshire Company’s 15+ years of experience designing resistive touch-screen controllers, the AR1000 controllers enable low-risk product development, lower total system cost and shorter time to market for embedded resistive-touch designs.
Popular due to its low cost, acceptance of finger, glove or stylus-pen inputs, and overall ease of manufacturing and integration, resistive touch-sensing technology is suitable for applications such as mobile phones, industrial automation, retail point-of-sale, gaming/entertainment, and automobile navigation systems.
“The AR1000 controllers give designers the flexibility they need to quickly and easily implement analog resistive touch-screen interfaces,” said Steve Drehobl, vice president of Microchip’s Security, Microcontroller and Technology Development Division.
“The controllers meet the needs of today’s touch solutions with low cost and reduced development time, while delivering the Microchip brand promises of quality, reliability and performance.”
The AR1000 controllers provide universal 4-, 5- and 8-wire support, as well as support for SPI, I2C and UART communication interfaces. They are well suited for resistive-touch designs in the consumer (mobile communication devices, PDAs, GPS, media players, printers), medical (patient-monitoring equipment), industrial (kiosks, touch-screen monitors, portable instruments, point-of-sale terminals), and automotive markets (navigation systems), among others.
Development support
Microchip also announced the mTouch AR1000 Development Kit (part # DV102011) today, which provides everything designers need to get started using AR1000 controllers.
The kit includes the AR1000 development board, a 7” four-wire resistive touch screen, a PICkit Serial Analyzer and all necessary interface cables, as well as a CD containing technical documentation and all necessary software.
The CD also includes an easy-to-use AR1000 configuration utility, which has a Graphical User Interface (GUI) that enables designers to test all user-configurable options with the AR1000 controllers. The kit is priced at $99.99 and can be ordered today, at http://www.microchipdirect.com.
For additional design support, Microchip offers an online Touch-Sensing Solutions Design Center (http://www.microchip.com/mtouch). This comprehensive Web sites provides a wide range of technical tools and resources that designers can use for developing capacitive, inductive and resistive touch-sensing applications—all in one, convenient location.
The AR1000 series controllers are available in 20-pin QFN, SOIC and SSOP packages. Prices start at $1.15 each, in 10,000-unit quantities. Samples are available today.
Adding to Microchip’s comprehensive portfolio of mTouch capacitive and inductive touch-sensing solutions, the AR1000 controllers further solidify Microchip’s position of having the broadest touch-controller product offering in the semiconductor industry.
By providing built-in decoding and advanced filtering, as well as controller-driven calibration, the controllers lower costs and reduce time to market for any embedded resistive-touch design.
Prior to the AR1000 controller, embedded systems implementing resistive-touch user interfaces were limited to basic Analog-to-Digital Converters (ADCs) that required extensive development and integration.
The AR1000 controllers eliminate this type of trial-and-error engineering by providing sophisticated, proprietary touch-screen decoding algorithms that enable applications to receive fully processed, reliable touch coordinates.
Combining Microchip’s capabilities in microcontroller manufacturing with the recently acquired Hampshire Company’s 15+ years of experience designing resistive touch-screen controllers, the AR1000 controllers enable low-risk product development, lower total system cost and shorter time to market for embedded resistive-touch designs.
Popular due to its low cost, acceptance of finger, glove or stylus-pen inputs, and overall ease of manufacturing and integration, resistive touch-sensing technology is suitable for applications such as mobile phones, industrial automation, retail point-of-sale, gaming/entertainment, and automobile navigation systems.
“The AR1000 controllers give designers the flexibility they need to quickly and easily implement analog resistive touch-screen interfaces,” said Steve Drehobl, vice president of Microchip’s Security, Microcontroller and Technology Development Division.
“The controllers meet the needs of today’s touch solutions with low cost and reduced development time, while delivering the Microchip brand promises of quality, reliability and performance.”
The AR1000 controllers provide universal 4-, 5- and 8-wire support, as well as support for SPI, I2C and UART communication interfaces. They are well suited for resistive-touch designs in the consumer (mobile communication devices, PDAs, GPS, media players, printers), medical (patient-monitoring equipment), industrial (kiosks, touch-screen monitors, portable instruments, point-of-sale terminals), and automotive markets (navigation systems), among others.
Development support
Microchip also announced the mTouch AR1000 Development Kit (part # DV102011) today, which provides everything designers need to get started using AR1000 controllers.
The kit includes the AR1000 development board, a 7” four-wire resistive touch screen, a PICkit Serial Analyzer and all necessary interface cables, as well as a CD containing technical documentation and all necessary software.
The CD also includes an easy-to-use AR1000 configuration utility, which has a Graphical User Interface (GUI) that enables designers to test all user-configurable options with the AR1000 controllers. The kit is priced at $99.99 and can be ordered today, at http://www.microchipdirect.com.
For additional design support, Microchip offers an online Touch-Sensing Solutions Design Center (http://www.microchip.com/mtouch). This comprehensive Web sites provides a wide range of technical tools and resources that designers can use for developing capacitive, inductive and resistive touch-sensing applications—all in one, convenient location.
The AR1000 series controllers are available in 20-pin QFN, SOIC and SSOP packages. Prices start at $1.15 each, in 10,000-unit quantities. Samples are available today.
Monday, July 27, 2009
Microchip PIC MCUs with enhanced mid-range 8-bit core
NEW DELHI, INDIA: Microchip Technology, a leading provider of microcontroller and analog semiconductors, has announced the first six members of the PIC16F193X family of MCUs featuring Microchip's enhanced mid-range 8-bit core -- the PIC16F1934, PIC16LF1934, PIC16F1936, PIC16LF1936, PIC16F1937 and PIC16LF1937.
The new family extends Microchip's PIC microcontroller portfolio of over 550 compatible members, targeting a wide variety of applications in the appliance, consumer, industrial, medical and automotive markets.
The family's increased memory and core capabilities deliver enhanced support for both C and Assembly programmers, and "LF" family members feature Microchip's nanoWatt XLP Technology -- for extreme low power consumption -- enabling designs to achieve world-leading battery lifetime.
Continuing in the PIC MCU tradition of integrating extensive peripherals, the new family offers Direct LCD drive and support for mTouch capacitive touch-sensing solutions.
"We are pleased to announce the first family of microcontrollers based upon our enhanced mid-range 8-bit core," said Steve Drehobl, vice president of Microchip's Security, Microcontroller and Technology Development Division. "Building upon the worldwide customer acceptance of Microchip's existing Mid-range 8-bit products, the new devices enable new levels of functionality at lower system cost."
The new family extends Microchip's PIC microcontroller portfolio of over 550 compatible members, targeting a wide variety of applications in the appliance, consumer, industrial, medical and automotive markets.
The family's increased memory and core capabilities deliver enhanced support for both C and Assembly programmers, and "LF" family members feature Microchip's nanoWatt XLP Technology -- for extreme low power consumption -- enabling designs to achieve world-leading battery lifetime.
Continuing in the PIC MCU tradition of integrating extensive peripherals, the new family offers Direct LCD drive and support for mTouch capacitive touch-sensing solutions.
"We are pleased to announce the first family of microcontrollers based upon our enhanced mid-range 8-bit core," said Steve Drehobl, vice president of Microchip's Security, Microcontroller and Technology Development Division. "Building upon the worldwide customer acceptance of Microchip's existing Mid-range 8-bit products, the new devices enable new levels of functionality at lower system cost."
Labels:
8-bit core,
low-power 8-bit PIC MCUs,
MCUs,
Microchip
Wednesday, July 15, 2009
Microchip's new family of low-power 8-bit PIC MCUs
CHANDLER, USA: Microchip Technology Inc. has announced a new family of 8-bit PIC microcontrollers (MCUs) featuring nanoWatt XLP technology, which enables extremely low sleep currents.
The high-performance, low-power PIC18F13K22, PIC18LF13K22, PIC18F14K22 and PIC18LF14K22 (PIC18F1XK22) MCUs are available in 20-pin packages and provide 1.8 to 5.5V operation, with up to 16 Kbytes Flash program memory.
The devices feature an enhanced peripheral set that includes support for mTouch capacitive touch sensing, and are well suited for a variety of general-purpose applications.
nanoWatt XLP technology allows the PIC18LF1XK22 MCUs to operate longer using less power, or with fewer battery changes, by enabling sleep current of 34 nA, typical at 1.8V; Timer1 oscillator currents of 800 nA, typical at 1.8V, 32 kHz; and Watchdog Timer currents of 300 nA, typical at 1.8V. Most low-power applications require one or more of these features, and nanoWatt XLP Technology combines all of them into one device in the “LF” versions of the PIC18F1XK22 family.
“Building upon the tremendous success of our 8-bit PIC18 and 16-bit PIC24 ‘K’ series products, Microchip is pleased to expand the family of 8-bit PIC18 ‘K’ devices that feature nanoWatt XLP technology and add 5V operation,” said Steve Drehobl, vice president of Microchip’s Security, Microcontroller and Technology Development Division.
“With their small size and comprehensive feature set, the PIC18F1XK22 devices enable designers to create smaller, lower-power and higher-performing designs, at lower costs.”
The high-performance, low-power PIC18F13K22, PIC18LF13K22, PIC18F14K22 and PIC18LF14K22 (PIC18F1XK22) MCUs are available in 20-pin packages and provide 1.8 to 5.5V operation, with up to 16 Kbytes Flash program memory.
The devices feature an enhanced peripheral set that includes support for mTouch capacitive touch sensing, and are well suited for a variety of general-purpose applications.
nanoWatt XLP technology allows the PIC18LF1XK22 MCUs to operate longer using less power, or with fewer battery changes, by enabling sleep current of 34 nA, typical at 1.8V; Timer1 oscillator currents of 800 nA, typical at 1.8V, 32 kHz; and Watchdog Timer currents of 300 nA, typical at 1.8V. Most low-power applications require one or more of these features, and nanoWatt XLP Technology combines all of them into one device in the “LF” versions of the PIC18F1XK22 family.
“Building upon the tremendous success of our 8-bit PIC18 and 16-bit PIC24 ‘K’ series products, Microchip is pleased to expand the family of 8-bit PIC18 ‘K’ devices that feature nanoWatt XLP technology and add 5V operation,” said Steve Drehobl, vice president of Microchip’s Security, Microcontroller and Technology Development Division.
“With their small size and comprehensive feature set, the PIC18F1XK22 devices enable designers to create smaller, lower-power and higher-performing designs, at lower costs.”
Labels:
8-bit MCUs,
low-power 8-bit PIC MCUs,
MCUs,
Microchip
Tuesday, July 14, 2009
Microchip's 8-bit MCUs for medical, metering apps
CHANDLER, USA: Microchip Technology Inc. announced a new four-member family of high-performance 8-bit PIC microcontrollers (MCUs) for medical and metering applications.
The PIC18F87J93 8-bit direct LCD-drive MCUs feature up to 16 channels of 12-bit Analog-to-Digital Conversion (ADC), the mTouch Charge Time Measurement Unit (CTMU) peripheral for capacitive touch sensing, and a hardware Real-Time Clock and Calendar (RTCC).
With this enhanced analog functionality and rich peripheral set, the PIC18F87J93 family enables the highly precise measurements and sensors, as well as the high levels of integration that medical and metering applications require.
The 64- and 80-pin PIC18F87J93 MCUs have memory options ranging from 64 to 128 KB Flash program memory and 4 KB RAM, and are pin-out compatible with Microchip’s entire LCD-drive MCU portfolio. The on-chip 12-bit ADC with up to 16 channels performs auto acquisition and works during sleep mode, enabling a low-power, reliable analog interface.
The on-chip hardware RTCC also works in sleep mode, to enable real-time clock and calendar functions with low power consumption. Additionally, the mTouch CTMU peripheral enables the addition of capacitive touch-sensing user interfaces or precise time measurements, and lowers system costs.
The LCD charge pump provides contrast control and maintains low-power ratings even with advanced feature sets.
“Microchip’s PIC18F87J93 family expands our portfolio of cost-effective LCD products. For metering and medical applications, their 12-bit ADC, mTouch peripheral and extended memory deliver a cost-effective feature set,” said Mitch Obolsky, vice president of Microchip’s Advanced Microcontroller Architecture Division. “The new devices offer a drop-in upgrade in features and memory to our popular and low-cost PIC18F85J90 LCD family.”
Example metering applications for the PIC18F87J93 MCUs include electricity, flow, gas and water meters. Example medical applications include blood-pressure meters, patient-monitoring systems, infusion pumps and CPAP devices.
The new devices are also are well suited for applications in the consumer (Internet-enabled appliances, white goods, game controllers and coffee machines); industrial (home-alarm/security-system keypads, thermostats, power meters, security panels, data logging and central AC communication controllers); and automotive markets (control panels and body electronics), among others. The MCUs complement Microchip’s 12-bit Quad MCP4728 Digital-to-Analog Converter (DAC), also announced, today.
Development support
To get started with the PIC18F87J93 family, customers can use the PICDEM LCD 2 Demo Board (part # DM163030, $125) in combination with the PIC18F87J9X Plug-In Module (part # MA180025, $25), which includes capacitive-touch buttons. Both are available now.
Additionally, the PIC18F87J93 family is supported by Microchip’s standard development tool suite, including the free MPLAB IDE, the MPLAB C Compiler for PIC18 and the MPLAB ICD 3 In-Circuit Debugger (part # DV164035). The MPLAB IDE now comes with the free Segmented Display GUI, which makes it easy to generate the code needed to drive LCD displays.
The PIC18F87J93 8-bit direct LCD-drive MCUs feature up to 16 channels of 12-bit Analog-to-Digital Conversion (ADC), the mTouch Charge Time Measurement Unit (CTMU) peripheral for capacitive touch sensing, and a hardware Real-Time Clock and Calendar (RTCC).
With this enhanced analog functionality and rich peripheral set, the PIC18F87J93 family enables the highly precise measurements and sensors, as well as the high levels of integration that medical and metering applications require.
The 64- and 80-pin PIC18F87J93 MCUs have memory options ranging from 64 to 128 KB Flash program memory and 4 KB RAM, and are pin-out compatible with Microchip’s entire LCD-drive MCU portfolio. The on-chip 12-bit ADC with up to 16 channels performs auto acquisition and works during sleep mode, enabling a low-power, reliable analog interface.
The on-chip hardware RTCC also works in sleep mode, to enable real-time clock and calendar functions with low power consumption. Additionally, the mTouch CTMU peripheral enables the addition of capacitive touch-sensing user interfaces or precise time measurements, and lowers system costs.
The LCD charge pump provides contrast control and maintains low-power ratings even with advanced feature sets.
“Microchip’s PIC18F87J93 family expands our portfolio of cost-effective LCD products. For metering and medical applications, their 12-bit ADC, mTouch peripheral and extended memory deliver a cost-effective feature set,” said Mitch Obolsky, vice president of Microchip’s Advanced Microcontroller Architecture Division. “The new devices offer a drop-in upgrade in features and memory to our popular and low-cost PIC18F85J90 LCD family.”
Example metering applications for the PIC18F87J93 MCUs include electricity, flow, gas and water meters. Example medical applications include blood-pressure meters, patient-monitoring systems, infusion pumps and CPAP devices.
The new devices are also are well suited for applications in the consumer (Internet-enabled appliances, white goods, game controllers and coffee machines); industrial (home-alarm/security-system keypads, thermostats, power meters, security panels, data logging and central AC communication controllers); and automotive markets (control panels and body electronics), among others. The MCUs complement Microchip’s 12-bit Quad MCP4728 Digital-to-Analog Converter (DAC), also announced, today.
Development support
To get started with the PIC18F87J93 family, customers can use the PICDEM LCD 2 Demo Board (part # DM163030, $125) in combination with the PIC18F87J9X Plug-In Module (part # MA180025, $25), which includes capacitive-touch buttons. Both are available now.
Additionally, the PIC18F87J93 family is supported by Microchip’s standard development tool suite, including the free MPLAB IDE, the MPLAB C Compiler for PIC18 and the MPLAB ICD 3 In-Circuit Debugger (part # DV164035). The MPLAB IDE now comes with the free Segmented Display GUI, which makes it easy to generate the code needed to drive LCD displays.
Labels:
8-bit MCUs,
medical,
metering applications,
Microchip
Wednesday, June 10, 2009
Microchip intros inductive touch sensing analog front end (AFE)
CHANDLER, USA: Microchip Technology Inc. announced from the Sensors Expo in Chicago the MCP2036 Analog Front End (AFE) for inductive touch-sensing applications.
Complementing the company’s royalty-free mTouch Inductive Touch-Sensing Solutions, the fully-integrated MCP2036 AFE works with almost any 8-, 16- or 32-bit PIC MCU or dsPIC DSC, making it even easier and more cost-effective for designers to enhance user interfaces with inductive touch-sensing technology.
This inductive-touch AFE includes a multiplexer, a frequency mixer, an amplifier, a driver, and a voltage reference, which drastically lowers component count and reduces design size and cost. Additionally, the AFE can be easily configured for a variety of applications in the appliance, industrial and automotive markets, among others.
Inductive touch sensing’s fundamental operating principles enable it to work through a front panel, such as plastic, stainless steel or aluminum. The technology also works through thick gloves and on surfaces where liquids are present.
These characteristics make inductive touch sensing suitable for applications in the appliance market because of the possibility of a stainless steel front panel; the industrial market because of the technology’s robustness; and the automotive market because of the technology’s sleek aesthetics and ability to reduce accidental-touch triggers.
“Microchip’s inductive-touch technology provides unique capabilities that complement our capacitive touch-sensing products,” said Steve Drehobl, vice president of Microchip’s Security, Microcontroller and Technology Development Division.
Drehobl continued, “With the MCP2036 AFE, we are continuing to make it easier and less expensive for engineers to make use of these unique features for applications requiring metal finishing and robust operation in wet environments.”
Design support
Designers wanting to learn more about implementing touch sensing into their applications can visit Microchip’s online touch-sensing design center at http://www.microchip.com/mtouch. This comprehensive Web site provides a host of application notes, source code and other technical resources related to developing touch-sensing designs.
The MCP2036 AFE is available in a 16-pin, 4 mm x 4 mm QFN package, as well as 14-pin PDIP and SOIC packages. The device is priced starting at $0.33 each, in 10,000-unit quantities. Samples are available today as are volume-production quantities.
Complementing the company’s royalty-free mTouch Inductive Touch-Sensing Solutions, the fully-integrated MCP2036 AFE works with almost any 8-, 16- or 32-bit PIC MCU or dsPIC DSC, making it even easier and more cost-effective for designers to enhance user interfaces with inductive touch-sensing technology.
This inductive-touch AFE includes a multiplexer, a frequency mixer, an amplifier, a driver, and a voltage reference, which drastically lowers component count and reduces design size and cost. Additionally, the AFE can be easily configured for a variety of applications in the appliance, industrial and automotive markets, among others.
Inductive touch sensing’s fundamental operating principles enable it to work through a front panel, such as plastic, stainless steel or aluminum. The technology also works through thick gloves and on surfaces where liquids are present.
These characteristics make inductive touch sensing suitable for applications in the appliance market because of the possibility of a stainless steel front panel; the industrial market because of the technology’s robustness; and the automotive market because of the technology’s sleek aesthetics and ability to reduce accidental-touch triggers.
“Microchip’s inductive-touch technology provides unique capabilities that complement our capacitive touch-sensing products,” said Steve Drehobl, vice president of Microchip’s Security, Microcontroller and Technology Development Division.
Drehobl continued, “With the MCP2036 AFE, we are continuing to make it easier and less expensive for engineers to make use of these unique features for applications requiring metal finishing and robust operation in wet environments.”
Design support
Designers wanting to learn more about implementing touch sensing into their applications can visit Microchip’s online touch-sensing design center at http://www.microchip.com/mtouch. This comprehensive Web site provides a host of application notes, source code and other technical resources related to developing touch-sensing designs.
The MCP2036 AFE is available in a 16-pin, 4 mm x 4 mm QFN package, as well as 14-pin PDIP and SOIC packages. The device is priced starting at $0.33 each, in 10,000-unit quantities. Samples are available today as are volume-production quantities.
Sunday, April 26, 2009
Microchip debuts nanoWatt XLP MCUs with lowest sleep current
CHANDLER, USA: Microchip Technology Inc. announced its next-generation low-power PIC microcontroller (MCU) families with nanoWatt XLP eXtreme Low Power Technology for sleep currents as low as 20 nA.
These three new 8- and 16-bit MCU families join three other recent 8-bit families that are all part of Microchip’s nanoWatt XLP portfolio, providing designers with a rich and compatible low-power migration path that includes on-chip peripherals for USB and mTouch sensing solutions. This industry-leading combination of low power consumption and functionality makes these PIC MCUs ideal for any battery-powered or power-constrained application.
“Microchip’s new nanoWatt XLP families of PIC microcontrollers have surpassed the competition by a substantial margin to offer a new industry benchmark for the lowest sleep current consumption,” said Tony Massimini, chief of technology at Semico Research Corporation. “When you factor in the integration of EEPROM, oscillators, USB and capacitive touch sensing peripherals, the potential reduction in system-level power consumption is quite substantial.”
You can watch head-to-head comparison video of Microchip’s nanoWatt XLP MCU current consumption vs. the competition on YouTube.
Three of nanoWatt XLP Technology’s key advantages are: Sleep currents down to 20 nA, Real-Time Clock currents down to 500 nA, and Watchdog Timer currents down to 400 nA. The vast majority of low-power applications require one or more of these features.
nanoWatt XLP Technology combines all three in a comprehensive portfolio of devices.
Whether it is extended battery life, sealed batteries, or the integration of energy harvesting, Microchip’s 8- and 16-bit PIC MCUs with nanoWatt XLP Technology provide more freedom for designers that need their products to operate longer using less power, or requiring fewer battery changes.
“The extremely low sleep current and numerous wake-up features of Microchip’s new nanoWatt XLP microcontrollers should be ideal for battery-operated devices, which actually spend most of the time asleep,” said Tom Starnes, embedded processor analyst at the semiconductor research firm Objective Analysis. “The interest in the market for such low-power processors, for use in consumer to industrial applications, is really on the rise.”
The three new nanoWatt XLP MCU families that were announced, include the four-member, 16-bit PIC24F16KA family, which features typical sleep currents as low as 20 nA along with integrated EEPROM memory, and small-footprint and low pin count (20- and 28-pin) package options. Additionally, this family enables applications to run for more than 20 years from a single battery. The six-member PIC18F46J11 and the six-member PIC18F46J50 8-bit MCU families feature typical sleep currents of less than 20 nA.
The general-purpose PIC18F46J11 MCUs provide up to 64 KB of Flash program memory and the peripheral set of a typical 64- or 80-pin device in only 28- or 44-pins; while the PIC18F46J50 devices add integrated Full-Speed USB 2.0 to enable connectivity for embedded applications requiring remote field upgrades or the downloading of data.
These three new 8- and 16-bit MCU families join three other recent 8-bit families that are all part of Microchip’s nanoWatt XLP portfolio, providing designers with a rich and compatible low-power migration path that includes on-chip peripherals for USB and mTouch sensing solutions. This industry-leading combination of low power consumption and functionality makes these PIC MCUs ideal for any battery-powered or power-constrained application.
“Microchip’s new nanoWatt XLP families of PIC microcontrollers have surpassed the competition by a substantial margin to offer a new industry benchmark for the lowest sleep current consumption,” said Tony Massimini, chief of technology at Semico Research Corporation. “When you factor in the integration of EEPROM, oscillators, USB and capacitive touch sensing peripherals, the potential reduction in system-level power consumption is quite substantial.”
You can watch head-to-head comparison video of Microchip’s nanoWatt XLP MCU current consumption vs. the competition on YouTube.
Three of nanoWatt XLP Technology’s key advantages are: Sleep currents down to 20 nA, Real-Time Clock currents down to 500 nA, and Watchdog Timer currents down to 400 nA. The vast majority of low-power applications require one or more of these features.
nanoWatt XLP Technology combines all three in a comprehensive portfolio of devices.
Whether it is extended battery life, sealed batteries, or the integration of energy harvesting, Microchip’s 8- and 16-bit PIC MCUs with nanoWatt XLP Technology provide more freedom for designers that need their products to operate longer using less power, or requiring fewer battery changes.
“The extremely low sleep current and numerous wake-up features of Microchip’s new nanoWatt XLP microcontrollers should be ideal for battery-operated devices, which actually spend most of the time asleep,” said Tom Starnes, embedded processor analyst at the semiconductor research firm Objective Analysis. “The interest in the market for such low-power processors, for use in consumer to industrial applications, is really on the rise.”
The three new nanoWatt XLP MCU families that were announced, include the four-member, 16-bit PIC24F16KA family, which features typical sleep currents as low as 20 nA along with integrated EEPROM memory, and small-footprint and low pin count (20- and 28-pin) package options. Additionally, this family enables applications to run for more than 20 years from a single battery. The six-member PIC18F46J11 and the six-member PIC18F46J50 8-bit MCU families feature typical sleep currents of less than 20 nA.
The general-purpose PIC18F46J11 MCUs provide up to 64 KB of Flash program memory and the peripheral set of a typical 64- or 80-pin device in only 28- or 44-pins; while the PIC18F46J50 devices add integrated Full-Speed USB 2.0 to enable connectivity for embedded applications requiring remote field upgrades or the downloading of data.
Subscribe to:
Posts (Atom)